A Ford Maverick Will Fit A Gnarly Twin-Turbo V8—With A Whole Lot Of Work
AIThis post was created with the assistance of artificial intelligence (AI).

TL;DR

Tucci Hot Rods unveiled a 2022 Ford Maverick fitted with a twin-turbocharged 5.0-liter Coyote V8 at the 2026 SEMA show. The build uses extensive custom drivetrain, suspension and chassis modifications; its setup is reported to be capable of up to 1,200 horsepower, but that figure is not a verified output measurement.

Tucci Hot Rods unveiled a 2022 Ford Maverick powered by a twin-turbo 5.0-liter Coyote V8 at the 2026 SEMA show, carrying out a swap the shop had once discussed as a joke. The custom build shows that the compact pickup can accommodate Ford’s V8, but only after extensive changes to its drivetrain, front suspension and chassis.

Buying for a business?Offer from Amazon

Get business pricing on garage and car supplies

  • Business-only prices and quantity discounts
  • Tax-exempt purchasing
  • Multiple users, one account, clear invoices
As an affiliate, we earn on qualifying purchases.

According to Engine Swap Depot, the Coyote engine is paired with two Hellion 62-millimeter turbochargers and modified with a different intake manifold, oil pan and fuel rails. Tucci routed the exhaust through the Maverick’s front fender vents using custom 3D-printed parts. The setup is reported to be capable of up to 1,200 horsepower; the source material does not provide a measured output figure or explain the conditions behind that rating.

The engine connects to a ZF 8HP70 eight-speed automatic through an LOJ Conversions adapter plate. A custom driveshaft links the transmission to a rear end from an S550-generation Mustang. Tucci retained the Maverick’s factory rear suspension, but the front end required more extensive work, including a modified subframe, custom lower control arms and an S197 Mustang steering rack and steering knuckles.

Ford Muscle reported that Tucci used 3D scanning to establish the lower-control-arm geometry. The steering rack had to be repositioned to make room for the engine, and part of the rear crossmember was cut. The finished truck is a custom show build, not evidence that the V8 swap is a straightforward or production-ready conversion.

At a glance
reportWhen: Unveiled at the 2026 SEMA show
The developmentTucci Hot Rods presented a Coyote V8-swapped, twin-turbo 2022 Ford Maverick at the 2026 SEMA show.

What the V8 Swap Required

The build matters because it turns a familiar compact pickup into a demonstration of how far a specialist shop can take a Maverick platform. The V8, turbochargers and Mustang-derived rear end are only part of the conversion: the steering, suspension, subframe and chassis also needed changes to make the components fit together.

For owners considering an engine swap, the project is better understood as a custom fabrication showcase than a parts list for a routine upgrade. The reported 1,200-horsepower capability is a claim about the setup, not a confirmed track result, reliability rating or figure shown to have been achieved in testing. The source material does not provide road-use, emissions or safety certification details.

Products Worth Considering

NOCO Boost Air AX65 2000A 12V Jump Starter with Air Compressor and Tire Inflator

NOCO Boost Air AX65 2000A 12V Jump Starter with Air Compressor and Tire Inflator

As an affiliate, we earn on qualifying purchases.

Tucci’s Maverick Builds

Tucci Hot Rods, a shop in Upstate New York, was among the builders Ford partnered with on Maverick projects in 2021. Its earlier build used a 2.0-liter EcoBoost and 3D-printed components to create a street-truck look. Ford later cited that project as one of the inspirations for the Maverick Lobo, according to the source report.

The new truck is that earlier Maverick, now substantially reworked. Tucci owner Dave Tucci told Ford Muscle that the original vehicle was a pre-production truck built for Ford, and that the idea of fitting it with a Coyote engine began as a joke after the first project. He said it eventually became a real plan. The 2026 SEMA unveiling marks the public presentation of that conversion.

“When we originally built the truck in 2021 for Ford, it was a pre-production vehicle. The build went over really well, and afterward, we joked that we should Coyote-swap it. Eventually, that joke turned into a real plan.”

— Dave Tucci, owner of Tucci Hot Rods, speaking to Ford Muscle

Power and Road-Use Details

The available reports do not establish the truck’s measured horsepower, whether it has been tested at the stated maximum, or how it performs under sustained driving. They also do not detail the build’s cost, completion schedule, emissions status or eligibility for regular road use. The 1,200-horsepower figure should be treated as reported capability, not a verified result.

It is also unclear whether Tucci plans to offer a conversion package or build similar trucks for customers. The account describes a highly customized show project and does not say that the parts, engineering or fabrication work are available as a standardized kit.

Testing After the SEMA Reveal

The Maverick has been unveiled, but the supplied reports do not announce a next event, performance test or customer program. Any further details about dyno results, track use or road certification would help clarify what the twin-turbo setup can do beyond its reported capability. Until Tucci or another source provides those details, the build is best viewed as a demonstration of extensive custom work rather than a verified high-output production option.

Key Questions

What engine is in Tucci Hot Rods’ Ford Maverick?

The 2022 Maverick has a 5.0-liter Ford Coyote V8 fitted with two Hellion 62-millimeter turbochargers, according to the reports.

How much power does the twin-turbo Maverick make?

The setup is reported to be capable of up to 1,200 horsepower. The available source material does not give a measured dyno result confirming that output.

What other major changes did the swap require?

The build uses a ZF 8HP70 automatic, a custom driveshaft, an S550 Mustang rear end and a modified front suspension. Tucci also moved the steering rack, altered the subframe and cut part of the rear crossmember to accommodate the installation.

Is this a factory Ford Maverick option or a bolt-in conversion?

No. It is a custom Tucci Hot Rods build shown at SEMA. The reports do not describe it as a Ford production option or a standardized bolt-in conversion kit.

Source: thedrive.com

You May Also Like

Bmw Surges In Global Coverage

Search interest and media mentions of BMW have spiked significantly recently, indicating increased global attention, though the reasons remain unconfirmed.

AI-Powered Coffee Runs And Service Visits Are Coming To Rivians In 2027

Rivian says its AI assistant could order coffee and arrange vehicle service in 2027, once the features are reliable enough for broader release.

Toyota’s New Gas Go-Kart Costs $2,500, Fits In A Minivan, And Proves Fun Isn’t Dead

Toyota announces a new gas-powered go-kart costing $2,500, designed to fit in a minivan, highlighting a trend toward fun vehicles for families and enthusiasts.

Xiaomi Unveils Custom Chip For Driver-Assist Features

Xiaomi introduces its own dedicated chip for vehicle driver-assist features, marking a significant step in automotive technology development.