TL;DR
A road.cc review of SKS’s Rennkompressor 60, a numbered special edition marking 60 years of the pump, found it well made and effective on bicycle tyres. The reviewer criticized its stability and small, hard-to-read pressure gauge, and judged its £84.99 price poor value against similarly priced alternatives.
SKS’s Rennkompressor 60, a numbered special-edition floor pump marking six decades of production, has a solid steel-and-wood construction but drew criticism in a road.cc review for its unstable base and difficult-to-read gauge. The reviewer said it inflated bicycle tyres effectively, but felt its £84.99 price was hard to justify against competing pumps with a steadier feel.
Get business pricing on garage and car supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
The reviewed pump has a steel tube, cast base and wooden handle, with a numbered brass plaque identifying its place in the special run. SKS lists its dimensions as 650 × 354 × 69 mm, its weight as 2,200g and its pump volume as 271cm³. The manufacturer gives a maximum pressure of 16 bar, or 232psi.
In the reviewer’s use, the pump reached 130psi in 25mm tyres without much difficulty, and the pumping action was described as smooth. The reviewer did not test the stated 232psi maximum, saying there was nothing available at home that required inflation to that pressure. That maximum is therefore a manufacturer specification, not a result verified in the review.
The pump includes SKS’s MV Easy multivalve head, which the review says works with Presta, Schrader and Dunlop valves without switching parts. It also includes a head for Schwalbe Clik valves. The reviewer praised the secure valve fit but found the analogue gauge small and hard to read, particularly when trying to identify an exact pressure.
Trade-offs at the £85 Price
Floor pumps are everyday workshop equipment, and stability and readable pressure markings affect how easy they are to use as well as how confidently riders can set tyre pressure. The review’s main reservation is that the Rennkompressor 60’s base did not feel planted, while its small gauge made fine readings difficult. Those drawbacks matter most to riders who adjust pressure within a narrow range.
The review compared the pump with the Lezyne Alloy Floor Drive, which had the same listed £84.99 price, and Birzman’s The Pump with Helix, listed at £89.99. The reviewer said both alternatives felt more stable and had clearer gauges. These are the reviewer’s comparisons, not results from a new controlled test, but they frame the value question for buyers choosing among similarly priced floor pumps.
Products Worth Considering

NOCO Boost Air AX65 2000A 12V Jump Starter with Air Compressor and Tire Inflator

Nextbase 222 1080p HD Dash Cam with 140° Viewing Angle

Milwaukee M12 FUEL 12V 1/4-Inch Hex Impact Driver Kit
As an affiliate, we earn on qualifying purchases.
A 60-Year Special Edition
SKS presents the Rennkompressor 60 as a tribute to its floor pump, which the manufacturer says dates to 1966. The edition retains a classic workshop appearance, combining a clear-coated steel tube, brass details and a real-wood handle. Its numbered brass plaque marks it as part of a limited build run, although the supplied material does not state how many pumps were made.
The road.cc review judged the materials and construction positively, while noting some roughness on one end of the handle that the reviewer smoothed with fine sandpaper. It also points to a five-year warranty and says nearly every component can be replaced. Those features may appeal to buyers seeking a repairable, traditional design, but the review found that construction quality did not translate into a particularly satisfying experience in use.
For comparison, the review cited the Lezyne Alloy Floor Drive’s large, easy-to-read gauge and stable base, as well as a similar design from Birzman. Both models are described as capable of 220psi. The comparison is relevant because the reviewer placed them close to the SKS in price and said they performed better on stability and gauge clarity.
“It works well enough, but just feels as though it’s behind modern pump designs for stability and general feel – especially at this price point.”
— road.cc reviewer
Limits of the Review Test
The review did not test the manufacturer’s 232psi maximum pressure; its highest described use was inflating 25mm tyres to 130psi. The supplied material also does not provide independent pressure-accuracy measurements for the gauge or a direct side-by-side test protocol for the competing pumps. The stability and usability comparisons should be understood as the reviewer’s assessment from use, rather than laboratory findings.
The source identifies the pump as a limited, numbered edition but does not state the production quantity or how many remain available. It also does not give a separate release date or details about availability in markets beyond the UK price cited in the review.
Check Price and Pump Fit
Readers considering the Rennkompressor 60 can compare its current price and availability with the Lezyne Alloy Floor Drive and Birzman The Pump with Helix, paying particular attention to base stability and gauge legibility. The review’s findings suggest trying a pump in person may help buyers judge those factors, especially if precise pressure adjustment is a priority.
No further product update or follow-up test is specified in the source material. The manufacturer’s listed specifications, five-year warranty and replaceable-component design remain relevant points for prospective buyers to check against the terms supplied by the retailer or SKS.
Key Questions
What is the SKS Rennkompressor 60?
It is a special-edition floor pump marking 60 years of the Rennkompressor. It has a steel tube, cast base, wooden handle and a numbered brass plaque.
How much does the Rennkompressor 60 cost?
The review lists a UK recommended retail price of £84.99. The source does not confirm current retailer prices or availability.
Did the review verify the 232psi maximum?
No. 232psi is the manufacturer’s stated maximum. The reviewer did not test that pressure and reported inflating 25mm tyres to 130psi.
What were the review’s main criticisms?
The reviewer found the fold-out legs and small base unstable and said the small analogue gauge was difficult to read precisely. The review also noted rough finishing on one end of the wooden handle.
Which valve types does the pump support?
According to the review and product information, the pump works with Presta, Schrader and Dunlop valves through its multivalve head and includes a head for Schwalbe Clik valves.
Source: road.cc
